• It DOUBLES your profit.
  • Mason contractors have bought more Non-Stop Heavy-Duty since1976 than any other elevating scaffolding.
  • The only elevating scaffolding designed specifically for cut-upwalls.
  • The most powerful winch - crank it one-handed, fully loaded.
  • Never run a wall scaffold-high again.
  • The most room - 8 boards up top.
  • No BS Lifetime Guarantee.

If You Increase Your Production 20%,Your Profit will Increase About 20%, Right?

WRONG! Your profit will actually DOUBLE.

Here’s how it really works out:Mason contractors’ bids are about 40% Materials, 50% Labour, and 10% Overhead and Profit.
See how the Labor number is 5 times bigger than the Profit number?
Just knock 20% off your Labour cost and you will DOUBLE your profit.
The money you were paying out in labour shifts over to profit and goes right in your pocket.

 

Heavy-Duty provides such features as starting on the ground to eliminate moving your men at scaffold-high, leaving the x-braces in place, a powerful winch that can actually crank the scaffold with a full load of materials, towers that won't sway, or fold up and collapse, and simplicity that makes your men actually want to use it. We designed out all the small parts and backed it with a lifetime warranty. The Heavy-Duty today is still the only elevating scaffold to give you all these money-saving advantages:
  • The stongest winch on the market - twice as strong as anyone else's.
  • The strongest towers - guaranteed to never bend.
  • Rack Brackets to quickly bundle your towers and get them moved to the next job without lost parts. They save days over clunky bunk racks
  • The most working room.
  • Quickly adaptable to pilasters, end returns, just about any special situation you may encounter.
  • Sets up just as fast on cut-up work as it does on long, straight walls.

The Strongest Winch Available

The Winch is the heart of any elevating scaffold system. One breakdown can cost you thousands. It must be easy to crank, because if it's not, your laborers will avoid it, and your bricklayers will be back to bending and stooping. And then you may as well be back on frames. In other words, it's got to be the best, the strongest, and the most reliable. The Heavy Duty two-speed winch has twice the cranking power of anything on the market. No one has yet duplicated the power, quality, and safety you get in the Heavy-Duty winch. It's so easy to crank, two laborers can raise 105 feet of scaffold 16" in about 3 minutes. Cranking is actually easier than tending.
  • Absolutely cannot backlash and free-spin as others do.
  • When you top out, shift to high gear to lower your scaffold in record time.
  • Wear parts are case hardened, and our special gear geometry makes it impervious to debris.
If it ever breaks, we fix it free. Including freight.

Several Planking Options for Any Type of Job

A. Laborers' platform supports five 16-foot boards.
B. Masons' outriggers are available to support up to five boards.
C. Three boards form a standard workbench in the open bays.
D. Built-in hop-board outriggers can be used to extend the workbench.

Winter Overhead Protection System

The Non-Stop Overhead Protection System can be used to provide a simple winter enclosure. The overhead beam telescopes to extend up to 10" behind the face of the wall. The system attaches securely to the elevating carriage, and the x-braces need not be removed and replaced. All parts are captured, and the beam does not have to be threaded on from the top. Plus, all components serve both right and left-hand elevating carriages. A cost-effective solution when a covering is needed for 2 to 4 months.

Winter Total Enclosure

The Total Enclosure System is for use in extremely cold regions where there is need to keep both sides of the wall warm for several days at a time, as much as 7 months out of the year. The outside framework is curved for easy poly installation,and constructed of round tubing to accept standard wind clips

Rack Brackets

Rack brackets are the fastest and simplest way to move Heavy-Duty scaffolding from job to job. Rack brackets secure up to 10 fully assembled towers in a rigid 48"-wide bundle. Using rack brackets, up to 20 assembled towers can be hauled side-by-side on any standard 8'-wide trailer. The diagram shows how 10 towers, 18' tall form a bundle only 20' in length. Towers assembled 27' tall form a bundle less than 30' in overall length. Using rack brackets, 133 running feet of scaffold can be unloaded from a trailer in under 3 minutes, putting you on the wall faster.

Access 

The Access Landing will fit on either left or right-hand carriages allowing it to be used on either end of the scaffold. Simply climb the tower, and as you approach the work platform, climb into the access landing. From there, you can step onto the bricklayers walk boards.

Elevating Carriages

The Non-Stop carriage uses 4 hardened aluminum rollers on stainless steel shafts to allow the work platform to roll smoothly up and down the tower. Time has proven this system to be unaffected by weather and debris. The rollers never seize or deform the towers.

Rest Platform

OSHA and EM-385 regulations require a rest platform after climbing certain distances vertically.

Parts Baskets

Parts baskets keep all your small parts in one container, instead of all over the job site (or the highway!). By adding a simple guardrail kit, you can even use it for a legal man basket.

Heavy Duty 14-foot Bridge System

The bridge unit is 14 feet long and sets up fast and easy between two towers. No tools needed. The components lock together rather than bolt together. Faster and safer.

Heavy-Duty Component Diagram and Parts List

A. 8'-8" Basic Tower - 65 lbs
B. Elevating Carriage - 32 lbs
C. Winch & Pulley Assembly - 49 lbs
D. 4'-6' Tower Extension - 31 lbs
E. Pulley Extender - 15 lbs
F. Swivel Forklift Bar - 160 lbs
G. Wall Tie-In Bracket 10 lbs
H. Rack Bracket - 52 lbs
I. Rack Leveler - 16 lbs
J. Masons End Guard Panel - 10 lbs
K. Leveling Jack - 14 lbs
L. Guardrail Post - 7 lbs
M. Labourers End Guardrail Panel - 17 lbs
N. Adjustable Straight Brace - 13 lbs
O. Straight Brace - 13 lbs
P. Inside Corner Arm - 40 lbs
Q. X-Brace - 16.5 lbs

Technical Specifications

Maximum Weight Capacity per Pair - 2800 lbs
Maximum Working Height - 80 ft
Labourers Platform - 3 boards (4 in open bays)
Masons Workbench - 24"
Masons Walk Platform - 0 to 24"
Wt per Base Tower with Carriage & Winch - 150 lbs
Face of Wall to Back of Scaffold - 7'-1"
Tower Width - 14"
Back to the top