Reach Every Light Fixture and All Your A/V Equipment, Safely and Easily Over Any Floor Layout
The Light Bulb Scaffold™ System solves your access problems in:
• Auditoriums – over the rows of seats.
• Churches – above the pews, balconies, and choir loft.
• Theatres with stadium seating.
• Lectures halls with fixed desks and stadium seating.
• Stepped balconies.
Now you can own a scaffold system your own people can use safely and comfortably in places that used to be impossible to access. The secret to the Light Bulb Scaffold™ System’s versatility is its Spanner Kit consisting of 4 interlocking beams and 4 legs. The 35-pound beams lock together to make a rigid base for the tower. The legs on the corners of the base adjust up and down over a 5-foot range to make up for uneven floor levels. You can build the tower over just about any floor obstruction, and on steps or slopes.
The Light Bulb Scaffold™ System is the solution to all your access problems. It features:
- Low initial investment.
- Sets up in about 24 minutes with 2 men. No tools required.
- No part weighs more than 35 pounds.
- Comes with casters to roll it along the rows.
- Goes where electric lifts can't, at less than half the cost.
- Versatile – adapts to virtually any floor plan.
- Easy to transport and store. Two rolling storage racks fit through any 3-foot doorway.
- Safe and sturdy – meets all OSHA regs.
- Zero maintenance costs.
The Best Light Bulb Changing Scaffold
Using the Light Bulb Scaffold™ System to change light bulbs, perform A/V/L work, and other maintenance chores in an auditorium is as easy as setting up a scaffold in a wide-open gymnasium.
The Light Bulb Scaffold™ system uses an innovative new light-weight Spanner Kit that adapts to virtually any floor layout. The spacing of the 4 legs is adjustable for any row spacing. The legs telescope up and down as much as 5 feet to provide a solid, level base on stepped or sloped floors, and above stadium seating like choir lofts. It only takes about 5 minutes to assemble the base, without tools. The entire scaffold can be built in less than 25 minutes. The kit comes with casters to roll the tower along the row of seats.
The Best Scaffolding For Churches and Schools
Adaptable To Any Floor Lay-Out
Curved rows and uneven floor levels are no problem for the Light Bulb Scaffold™ System. Using the included locking casters, you can roll the tower along the rows to change bulbs over the row.
The system is wonderful for auditoriums and lecture halls with curved stadium seating.
The legs on the corners of the spanner kit are fully extended on the low side, and partially extended on the high side. The beams are well above the seats.
The Light Bulb Scaffold System is easy to assemble because no part weighs more than 35 pounds.
The Best Scaffold Storage System
The LBS system stores in two rolling racks you easily move to the exact place you need your tower. In between jobs you can easily roll them into a corner of a storage room.
The Frame Rack measures only 32" wide by 52" long and 6' high and takes up less than 12 square feet of storage space.
The Parts Rack stores all the braces, beams, aluminum boards, guardrails, etc., measures only 28" wide by 79" long and 3' high and takes up less than 16 square feet of storage space.
Both racks will fit through a standard 3-foot doorway.
The racks are easy to transport in a pickup truck, and they will fit side-by-side on a 5-by-8 utility trailer.